Categories Automobile

Fuel Injection and its types

Page Visited: 4090

Read Time:2 Minute, 25 Second

Hello Guys I am here to give information on fuel injection which is mostly used in automotive engines and has replaced carburetor. It is used in all modern diesel compression and petrol combustion engines. Fuel injection is the process of injecting fuel into the engine, using an injector. It is a replacement for carburetor. In this article, we will see what is fuel injection and its types

It is a better method of spraying fuel creating a better air-fuel mixture to get better fuel efficiency and reduce emissions. As the fuel injectors spray fuel directly into the cylinders the loss of fuel is lower than the carburetors. There are 4 types of fuel injection.

Types of Fuel Injectors:

1 Throttle body injectors or Single Point Injector (TBI):

This is the simplest form of Fuel Injection which was the replacement for carburetors. It has one or two fuel injectors on the throttle body which delivers the aspect ratio of the fuel-air mixture to every fuel intake manifold in the engine. The drawback was the cylinder closest to the injectors got a better fuel mixture than the cylinders away from it. The reason TBI replaced carburetor was TBI would easily adjust according to air density and altitude and was independent of the vacuum manifold.

2 Port or multi-point fuel injection (MPFI):

Unlike TBI, MPFI has separate injectors for every cylinder, which means a better fuel mixture in all cylinders. If the engine has 4 cylinders it will have 4 fuel injectors located at the intake port of the manifold. The fuel is misted at the intake manifold, since it is misted so close to the intake manifold, it ensures full combustion of the sprayed fuel making it more efficient than TBI and providing better fuel efficiency. This allows more even fuel distribution. MPFI lessens the possibility that fuel will condense in the intake manifold.

3 Sequential fuel injection (SFI):

It is the same as MPFI, MPFI injects fuel at the same time but Sequential fuel injection triggers each injector nozzle independently and is timed like spark plugs. SFI sprays the fuel immediately before or as the intake valve opens. There is not much difference between SFI and MPFI but the spray timing makes the difference. This correct timing of spraying fuel has improved efficiency and emission.

4 Direct injection(DI):

DI is one of the most advanced fuel injection technology so far. Direct Injection is mostly used in diesel engines but it is making its way to petrol engines slowly. In DI the fuel is directly sprayed in the combustion chamber of the cylinder. As the fuel is directly injected there is no wastage of fuel or any carbon deposit on the intake valve. The ECU senses the amount of fuel required and only that amount is supplied. Direct injection fuel metering is more precise than any other system.

Courtesy: Engineering Explained

About Post Author

Girish

Hello Guys
I am a website developer by profession but is always keen on learning new things. I have been investing in Mutual funds, stock market for the past few years because of which I have gained good knowledge. I started my entrepreneur journey in 2019 which lead me to learn more things as I am moving forward. I always love to share whatever I learn. Always had a craze for cars from my childhood, which inspired me to start this website.

Happy

Happy


100 %

Sad

Sad


0 %

Excited

Excited


0 %

Sleepy

Sleepy


0 %

Angry

Angry


0 %

Surprise

Surprise


0 %

More From Author